|
|
|
|
|
Archco-Rigidon 400 |
|
Archco-Rigidon 500 |
|
Archco Rigidon-600 |
Uses
These products will resist a wide range of chemicals with certain grades being suitable under immersion temperatures up to 100°C. They are particularly suitable for offshore applications where the Archco Rigidon 403D, in particular, has an extensive track record in lining process vessels and equipment.
Archco Rigidon 403D has been extensively used as a tank lining and for the lining of equipment such as valves and pump casings in both the power generating and the chemical industries.
<More> |
|
Uses
This product offers the best performance of all the glass flake reinforced linings as well as being unaffected by immersion temperatures up to 100°C. The percentage and size of glass flakes used in these linings reduces their permeability by a factor of 20. They offer superior abrasion and erosion resistance where the design and shape of the substrate allows the 500 series materials to be used. <More>
|
|
Uses
This is a series of linings which are designed to give the optimum performance. The 600 series linings are typically used to line or coat concrete but are equally effective in lining steel.
The Archco Rigidon 603D and 623D are examples of products that have been extensively used to line bunded areas and storage tanks, particularly in the power generating and chemical industries.
<More>
|
Archco-Rigidon 700 |
|
Heatshield Special |
|
Heatshield 350 |
Uses
These Systems are primarily to protect concrete bund areas which are subject to severe chemical attack and physical loading. Areas where they are specifically recommended are chemical storage and effluent treatment tanks, bunds etc.
They can also be used to protect floors, drainage channels and sumps. These linings will withstand vehicle and pedestrian traffic.
<More>
|
|
Uses
Designed for high temperature service for the ever demanding oil, gas and chemical process industries, across a wide range of application areas including pressure and process vessels, storage tanks, sea water/oil separator.
<More>
|
|
Uses
For the external protection of steel smokestacks, hot vessel and valves on refineries, power stations, chemical process plant etc. The coating is easily applied by brush or airless spray to give cost effective, long life service to these component parts.
<More>
|
Rigspray |
|
Rigspray Micro |
|
HoldTight® 102 Flash Rust Inhibitor and Salt Remover |
Uses
Rigspray has been designed specifically for the long term protection of steel structures exposed to corrosive marine environments. It is ideally suited for the use in the oil industry on offshore structures in areas such as splash zones, underdeck areas, riser pipes and, with the simple introduction of a non-slip element, it is ideally suited for helidecks, main deck surfaces and all areas subject to extreme mechanical damage and erosion. <More>
|
|
Uses
A more economical coating system applied at a thickness of 600 microns, with an expected service life of up to 20 years.
<More>
|
|
Uses
An additive that is mixed with water during the pressurised washdown of wet abrasive, water blasted and dry blasted iron and steel surfaces. Keeps the surface free from flash rusting for up to 48 hours. <More>
|
Archco Rigidon Fibre-Trowel 750 |
|
|
|
|
Three-coat lining system for concrete
bund's, sumps and floors
Uses
An easy to apply, economical and effective lining
solution which is tough, flexible and resistant to
spillage from acids, alkalis and specified solvents
<More> |
|
| |
|