Protective Lining Systems
for Steel & Concrete
   
Home Page About Archco Rigidon News and updates Browse Archco Rigidon Products Archco Rigidon Video Contact Archco Rigidon
 
Archco Rigidon Product Guide
SYSTEM
DESCRIPITION
Method of Application
Applied Thickness (approx.)
Designation
Substrate
Temperature Limits
Immersion
Fumes/Spillage
Glass Flake Linings
400 Series
Medium duty linings which are reinforced with glass flakes. Theses systems are suitable in immersion conditions for duties which include severe chemical environments.
Spray or brush
1 mm
Lining
Steel
60°C (140°F)
90°C (2000°F)
500 Series
Heavy duty linings which are reinforced with glass flakes. These linings offer the ultimate in chemical resistance within the glass flake range of materials and can operate at temperatures up to 100°C under immersion conditions. These linings may also be used where abrasion and erosion resistance is more crucial.
Spray or trowel
2 mm
Lining
Steel
100°C (212°F)
170°C (338°F)
Filled Reinforced Linings
         
600 Series
Linings which are formulated from resin and glass fibre reinforcement together with a filled base coat. These linings are specifically recommended when a lining with a resin rich top coat is required for maximum chemical resistance.
Trowel and hand lay-up
3mm - 4mm
Lining
Steel or concrete
75°C (170°F)
60°C (140°F)
75°C (170°F)
60°C (140°F)
700 Series
A silica filled, glass cloth reinforced series of linings designed for heavy duty concrete and flooring protection, but can also be used on steel.
Trowel
3mm - 4mm
Lining
Concrete flooring
75°C (170°F)
150°C (300°F)
Specialty Coatings
Heatshield Special
A Specially developed lining for the offshore industry which is resistant to sea water and oil at operating temperatures up to 180°C under immersion conditions and 220°C under fume and gaseous conditions depending upon the chemical type and concentration.
Hot spray
750 microns
Lining
Steel
180°C (356°F)
220°C (428°F)
Rigspray
A lining developed for use in road and rail tankers carrying aggressive chemical products or acid waste. A specially developed top coat gives resistance to Hydrofluoric acid.
Spray or trowel
2 mm
Lining
Steel
100°C (212°F)
100°C (212°F)
Rigspray Micro
A more economical coating system applied at a thickness of 600 microns, with an expected service life of up to 20 years.
Trowel and hand lay-up
300 - 600
microns
Lining
Steel
65°C (149°F)
-
 
 
The copyright of this media is owned by Winn & Coales International Ltd. Reproduction in whole or in part without prior consent is prohibited. Whilst the information displayed on this website is thought to be accurate, users should evaluate the suitability
of each product for their own particular use. Winn & Coales International Ltd disclaims any liability regarding the accuracy
of information and its usage. For more information plese view our privicy policy